9V 3000mA Effects Pedal Power Supply
The Diago Powerstation is the ultimate pedal board power supply. It will power from 1 to 30 pedals without noise or hum.
Powering multiple effects pedals has long been a problem, and there are many power supplies available at varying costs, quality, compatibility and performance. Most pedal power supplies are transformer type, linear regulated designs, which are cheap to design and develop, but are expensive to make (and therefore buy), noisier, bigger, heavier and they get much hotter!
Cheaper power supplies are usually under-rated, unregulated, poorly filtered designs that polute your guitar's signal with splurges of noise and hum. More expensive power supplies are often engineering marvels, but there really is no need and they cost far too much.
The Diago Powerstation uses switch mode technology, making it quiet, light, efficient and small, reliably powering your pedals so you can concentrate on making music.
|Model||Diago Powerstation PS-01|
|Output||9V DC @ 3000 mA (27W)|
|Input||90-264VAC @ 50-60Hz|
|Line Regulation||±0.5% max|
|Load Regulation||±1% max|
|Mains Cable Inlet||2m figure 8 lead IEC320-C8|
|Output Barrel||2.1 x 5.5 x 12mm female barrel, centre -ve|
|Dimensions||105mm(L) x 44mm(W) x 29mm(D)|
|Protection||Short circuit, overload & over voltage protection|
|Operating Temperature||0°C to +40°C|
|Storage Temperature||-40°C to +85°C|
|Approval||CE, UL, cUL, TUV, CB, BSMI, RoHS and WEEE|
The Deluxe Daisy Chains (one supplied with each Powerstation) will power most 9V DC pedals that follow the Boss convention of 2.1mm, centre-negative barrel plugs, including most by Boss, Danelectro, Dunlop, Digitech, Ibanez, Korg, Morley, MXR and Zoom.
For other pedals, we have a wide range of Adaptors that attach to the Daisy Chain, allowing the Powerstation to supply power to virtually any pedalboard.
Hiç mesaj bulunmadı